Pinout for B0182 or B0190 for direct connection to custom board

[stakata]

I am planning to integrate a B0190 or B0182 IMX219 camera module with a custom Raspberry Pi hat. I had assumed the 30-pin connector on the small flex had the same pinout as the Pi Camera Module 2, and Pi Camera Module 3, but it is not working on my board.

Can you tell me if this pinout from the Raspberry Pi Camera Module 2 matches the 30-pin connector pinout of the B0182 and B0190?

RP-008150-DS-1-camera-module-2-schematics.pdf

Can you share a datasheet or connection table so I can ensure I have the right signals connected, especially on pins 1-15?

Thank you!

[Dion]

Hi there,

@stakata

Can you tell me if this pinout from the Raspberry Pi Camera Module 2 matches the 30-pin connector pinout of the B0182 and B0190?

If I understand correctly, you want to replace the module of the Raspberry Pi Camera Module 2 with B0182 and B0190, right? If so, yes, you’re good to go in this case.

@stakata

Can you share a datasheet or connection table so I can ensure I have the right signals connected, especially on pins 1-15?

Please reach out to our sales team([email protected]) for further information