Cannot use kit from DeviceMart on Raspberry Pi 4B - no driver, video, or manual

Hi everyone. I bought the Arducam 12MP*4 Quadrascopic Camera Bundle Kit for Raspberry Pi / Nvidia Jetson Nano/Xavier NX [B0397] and I can’t get it working on my Raspberry Pi 4B. I’ve searched around but couldn’t find any driver, video, or manual for it. Does anyone know how this thing is supposed to be set up?

Hey, that kit is the IMX477 multi-camera array. Before we go too deep, can you share a bit more about your environment? What OS image are you running on the Pi 4B, and have you gotten any output from the cameras at all (libcamera, raspistill, dmesg, etc.)?

I’m running Raspberry Pi OS. I honestly don’t have any logs or code output to share because I couldn’t even find the driver steps to follow. I connected the camera boards to the adapter the way they seemed to go, but I don’t know what config changes or drivers are needed.

That actually lines up with what I’d expect. The B0397 is the IMX477 multi-camera kit, and the missing piece here is the setup documentation. Arducam has a quick-start guide for the multi-camera array that covers the driver and configuration steps for Raspberry Pi.

I wasn’t able to find that page before. Which guide are you referring to?

The IMX477 Multi-Camera Kit quick start is here: Quick Start Guide for Arducam CamArray HAT Kit - Arducam Wiki

Thanks! So the driver and config steps for the Pi 4B are all in that guide?

Right. That documentation covers the quick-start setup on Raspberry Pi and the relevant driver/configuration steps for the IMX477 multi-camera kit. Work through it from the top, and if you hit a specific error after following the guide, post back with the log output and we can go from there.