Bad Frame Received

1

I have 3 AR1820 Cameras connected to their own USB Shield 3.0. I connected the shields to a 4-port USB to save ports on my laptop. Using the USBTest and loading one of the config files, I get the “Bad Frame received” error. When use one camera and plug the shield directly to a USB port on my laptop, the same config file works.

Any ideas how I can fix this and use multiple cameras?

2

@joshuag

usb3.0 + hub will result in insufficient bandwidth.
There are currently no good suggestions on the hub.

3

I’ve been using usb2.0 + hub with the same set of cameras, but the switch to usb3.0 did not work.