Hi,
We are using Arducam ov9281 UC-788 Rev B with Beagleplay board. As both have 22pins 0.5mm pitch, i am using Type B FFC Cable.
My Beagleplay board is booting up successfully if camera module is not connected. As soon as i am connecting camera module ( Arducam ov9281 UC-788 Rev B), Beagleplay is not booting up.
Initially i suspect Wrong or reverse connection creating an short. I checked Pinout of camera module, Beagleplay & RPi5. RPi5 & Beagleplay have 100% same pinout.
Another worry is current delivery capacity. As per our understanding, Arducam will consume 200mA of current. As per our understanding we are having ~500mA of margin in 3.3V power rail.
Request you to all, to help me with possible reason/ root cause of it, and how i can move forward in this issue.