Arducam B0332 camera connection problem with error screenshots

We have a client who can’t get their Arducam camera to connect. The product is the B0332. They’re getting a connection failure and sent us an error message, which I’m attaching here for review. Any idea what could be going on?

Thanks for the report. We haven’t identified a root cause yet, so we’ll need a bit more info. Could you post clear pictures of the front and back of the camera module? That will help us verify the hardware. We’re also taking a look at the error screenshot you attached.

Here are the photos from the client. This is the module they received as the B0332.

Thanks. Looking at the pictures, this appears to be a MIPI camera module. The B0332 is a USB camera, so the module in the photo doesn’t match a B0332.

That’s odd. The client ordered it as a B0332. Could these photos just be of the wrong module? Let me ask them to send the actual camera again.

Please do. Send clear front and back pictures of the actual B0332 module. Also check the board for any markings — Arducam boards are marked with a ‘UC-…’ identifier, which helps us identify the exact board model.

I checked with the client and looked at the images again. I don’t see any ‘UC-…’ marking on the board.

That’s a red flag. All Arducam boards carry a ‘UC-…’ marking to distinguish the board model. If the marking isn’t there, the camera may not be an Arducam camera at all. Can you double-check the camera and send the product link where it was purchased?

Understood. I’ll get the link and re-verify the module with the client. So at this point, the suspicion is that it’s not a genuine Arducam B0332?

Correct. Current conclusion: the photos show a MIPI camera, while the B0332 is a USB camera, and the board lacks the ‘UC-…’ marking found on Arducam boards. So we suspect the module in the photos isn’t an Arducam B0332. Next step is to verify the actual camera model and share the corresponding product link so we can confirm. For future technical issues, please cc Arducam support in the thread so we can respond faster.