Missing Instruction to use the VGA HM0360 with Raspberry Pi Pico

  1. Where did you get the camera module(s)?

  2. Model number of the product(s)?

  3. What hardware/platform were you working on?
    Raspberry Pi Pico

  4. Instructions you have followed. (link/manual/etc.)
    I did not find any instructions

  5. Problems you were having?
    Missing instructions for Pico

  6. The dmesg log from your hardware?

  7. Troubleshooting attempts you’ve made?
    Browse your Website

  8. What help do you need?
    The instructions to use this Camera with a Raspberry Pi Pico is just a wiring diagram which
    shows how to connect the camera to a pico.
    But instructions for the required software to run the camera are just for Arduino but nothing for a Pico.
    The above link to Resources is a generic link to arducam.com with all their products and I did not find anything specific for using the HM0360 camera.
    I contacted the arducam support but did not receive any answer yet.


i update this.
tx for your questions


I received feedback that you sent an email, and if you have any questions, you can continue to add.

I am missing instructions to use this camera with a Pico. You have instructions only for Arduino. This is useless for me. 22 days ago you promised to write instructions here:
But today there are still no instructions for Pico.
Regards. Martin


I hope this message finds you well. I wanted to follow up on our previous conversation regarding the document you requested me to write. After careful consideration, I regret to inform you that I won’t be able to fulfill this request at this time.

I apologize for any inconvenience this may have caused, and I want to assure you that this decision was not an easy one. Unfortunately, due to unforeseen circumstances, I am unable to commit to this project as previously agreed.

Thank you for understanding and please let me know if there is anything else I can assist you with.