-
Where did you get the camera module(s)? Arducam Store on Amazon - Arducam 16MP Autofocus Quad-Camera Kit for Raspberry Pi, 16MP IMX519 Autofocus Synchronized Pi Camera, Compatible with Nvidia Jetson Board
-
Model number of the product(s)? B0388
-
What hardware/platform were you working on? Jetson Orin Nano Super Developer
-
Instructions you have followed. (link/manual/etc.)
- First: https://blog.arducam.com/downloads/synchronized-quad-camera-kit-getting-started.pdf
- Then went single cam: Quick-Start-Guide - Arducam Wiki
-
Problems you were having? Could not get the imx519 to work - not recognized on the I2C, nothing showed up on /dev/video* - even tried downgrading to Jetpack 6.1.
-
The dmesg log from your hardware?
-
Troubleshooting attempts you’ve made? I’ve reinstalled, and reinstalled again the OS, tried getting the IMX519 to work, and absolutely nothing. It seems the drivers just aren’t available for Jetpack 6.2.2, and tried to force the IMX519 overlay and it bricked the boot. I eventually just went to another camera - IMX477 and it worked fine, no issues at all. The IMX519 just isn’t supported.
-
What help do you need? I want to get 3 camers connected to the Orin Nano - the IMX477 with an 8mm lens (currently working), and 2 cameras that are at least 12mp - one NOIR and the other RGB, and hoped the multiplexer would work with it.
Please recommend products for my setup.The IMX477 is great, and working. I need a NOIR and RGB camera of the same sensor that can be used for an overlay imagery 12MP minimum, but will work with the Jetson Orin Nano (the IMX519 doesn’t seem to be supported at present).