IMX477 on Xavier NX

  1. Where did you get the camera module(s)?
    Scorpion Visiton

  2. Model number of the product(s)?
    B0250 (and also tested with the generic Pi HQ cam)

  3. What hardware/platform were you working on?
    A Xavier NX carrier board - Jetson Nano Xavier NX Carrier Board - DSBOARD-NX2 |

  4. Instructions you have followed. (link/manual/etc.)
    We have followed the guide on getting the camera working: Arducam Complete High Quality Camera Bundle, 12.3MP 1/2.3 Inch IMX477 HQ Camera Module with 6mm CS-Mount Lens, Metal Enclosure, Tripod and HDMI Extension Adapter for Jetson Nano, Xavier NX - Arducam

  5. Problems you were having?
    We are running Jetpack 6.1, but don’t seem able to control the camera exposure via OpenCV.

  6. Troubleshooting attempts you’ve made?
    Reinstalling driver, attempting with different cameras/boards incase of hardware faults.

  7. What help do you need?
    Advice on what camera controls the Arducam driver should enable for an IMX477 camera (such as B0250) running on a Xavier NX board, and whether there are any specific instructions for accessing these controls via OpenCV.

First, you need to download the supported link list below:
Second, you use a third-party carrier board, which we do not support.