How to start with my 64MP Quad kit?

  1. Where did you get the camera module(s)?
    Direct from Arducam during pre-order

  2. Model number of the product(s)?
    SKU: B0402
    UC-512 Camarray HAT

  3. What hardware/platform were you working on?
    RPi 4, latest 64-bit OS

  4. Instructions you have followed. (link/manual/etc.)

  5. Problems you were having?

  6. The dmesg log from your hardware?

  7. Troubleshooting attempts you’ve made?

  8. What help do you need?
    How to get started and basic commands

Can I start with using the instructions for the IMX519 ? Or do I need separate drivers?

hi, @jake.carvey

64mp requires special drivers to be installed.

You can refer to the following documents to install and use.

Thank you for that - good to have the manual.

I now have some issues - is this the correct forum to discuss?

hi, @jake.carvey

Sorry for the late reply, do you have any questions?

Was able to finally get things to work. Most important question is in new topic (How to get full resolution from ALL of the cameras)

Since many users ask the 64MP camera, we will organize the document after the test is completed and reply to everyone.

1 Like