Difference between UC-599 and UC-788 causes problem

1

I am using UC-599 on balenaFin board with Raspberry PI CM3 under Ubuntu 20.04
It works fine with libarducam_mipicamera.so. Now i replaced it with UC-788 and it does not work. I2C logical analyzer shows, that inside init_camera call libarducam_mipicamera speaks to I2C addr 0x60, sends 4 zero bytes, than speaks to slave address 0x6C. UC-599 responds and works, but UC-788 does not respond and initialization fails. Both cameras are OV9281 based. Maybe somebody can give advise?

2

Hi,
Can you post a screenshot of the error log? In this way, we can locate and analyze the problem.