Configuration for "all pixels"/complete sensor with USB2.0_UC-391_Rev.E + DVP/MT9J003


am using the “Arducam MT9J003” cameras on the “USB2.0_UC-391_Rev.E” breakout board.

The arducam library contains some “sample” configurations but I am missing a one which fetches all available pixels of the camera. The file “Config/USB2.0_UC-391_Rev.E/DVP/MT9J003/MT9J003_RAW_8b_3664x2748_4fps.cfg” will result in a … 3664x2748 pixels image.

According to the docs it supports:
3856 x 2764 (entire sensor)
3840 x 2160 (16:9, Video mode)

How to get the data of the entire sensor? Simply replacing the height/width values in the cfg files is not enough - and I guess I am not experienced enough with the stuff in the files to know what to change.

Is there somebody out there who has a configuration file to retrieve the whole sensor pixel data (or in my case at least the whole “width” - as I want to create panoramas from a camera array.

Thanks advance,