Arducam AR1335 on RPI Compute module 3+

Raspberry Pi Cameras arducam-obisp-mipi-camera-module-on-raspberry-pi
1

Hi,

We are trying to use the AR1335 camera module B0245 on the raspberry pi compute module 3+ with the compute module io board v3.0. We have connected the camera module with the supplied cable to CAM0 port. Also connected CD0_SDA with GPIO_28 and CD0_SCL with GPIO_29. We have installed driver according to https://www.arducam.com/docs/arducam-obisp-mipi-camera-module/3-use-on-raspberry-pi/3-2-driver-installation/

The driver detects the camera and we get the correct video modes from v4l2-ctl --list-formats-ext, but when we try to run arducamstill -t 0 we dont get any video and this is the output of the program:

Hardare version: a02100
No match to hardware version!
Device /dev/video0) opened.
Video format set: UYVY (59565955) 1920x1080
select timeout

2

Moving the camera to CAM1 port and the I2C-connections from CD0_xx to CD1_xx solved the problem.

1 Like
3

Thanks for your feedback.

4

Hi!
when running ‘sudo arducamstill -t 0’ i’m getting error ‘Hardare version: a020d3
No match to hardware version!
Device /dev/video0) opened.
Video format set: UYVY (59565955) 1920x1080
select timeout’
raspberry pi 3B+ and arducam ar1335 with motorized ir-cut.