-
Where did you get the camera module(s)?Arducam
-
Model number of the product(s)?Arducam 64 hawkeye
-
What hardware/platform were you working on? pi4
-
Instructions you have followed. (link/manual/etc.)
-
Problems you were having? Cannot view video feed in fluid or mainsail
I cannot get the cam to show up in mainsail or fluid
When I try to test the cam I get
libcamera-still -t 5000 -o test.jpg -n
[9:45:13.819333166] [20313] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3572-e13ccdd5
[9:45:13.825542839] [20315] WARN CameraSensorProperties camera_sensor_properties.cpp:163 No static properties available for 'arducam_64mp'
[9:45:13.825594764] [20315] WARN CameraSensorProperties camera_sensor_properties.cpp:165 Please consider updating the camera sensor properties database
[9:45:13.825929148] [20315] ERROR CameraSensor camera_sensor.cpp:591 'arducam_64mp 10-001a': Camera sensor does not support test pattern modes.
[9:45:13.847017723] [20315] WARN RPI raspberrypi.cpp:1263 Mismatch between Unicam and CamHelper for embedded data usage!
[9:45:13.847705343] [20315] ERROR DelayedControls delayed_controls.cpp:87 Delay request for control id 0x009a090a but control is not exposed by device /dev/v4l-subdev0
[9:45:13.847898581] [20315] INFO RPI raspberrypi.cpp:1386 Registered camera /base/soc/i2c0mux/i2c@1/arducam_64mp@1a to Unicam device /dev/media3 and ISP device /dev/media2
[9:45:13.848592923] [20313] INFO Camera camera.cpp:1029 configuring streams: (0) 4624x3472-YUV420
[9:45:13.848729921] [20315] ERROR V4L2 v4l2_videodevice.cpp:1211 /dev/video0[14:cap]: Unable to request 0 buffers: Device or resource busy
[9:45:13.849231544] [20315] ERROR V4L2 v4l2_videodevice.cpp:1017 /dev/video0[14:cap]: Unable to set format: Device or resource busy
[9:45:13.849767814] [20315] ERROR V4L2 v4l2_videodevice.cpp:1211 /dev/video0[14:cap]: Unable to request 0 buffers: Device or resource busy
[9:45:13.850223511] [20315] ERROR V4L2 v4l2_videodevice.cpp:1211 /dev/video0[14:cap]: Unable to request 0 buffers: Device or resource busy
ERROR: *** failed to configure streams ***
The process that using it I believe is the mjpg stream which I hope is from fluidd using the cam and I’m just not configuring the webcam.txt file correctly.
pi 2855 0.0 0.0 536552 2000 ? Sl 05:44 0:00 ./mjpg_streamer -o output_http.so -w ./www-mjpgstreamer -i input_uvc.so -r 1920x1080 -f 30 -d /dev/video0
pi 3496 0.0 0.0 5912 628 pts/2 S+ 05:51 0:00 grep --color=auto 2855